Setting The Backlight - Denso BHT-100BW-CE User Manual

1.3 Setting the Backlight

Pressing the right-hand trigger switch (M4 key) while holding down the SF (Shift) key activates or
deactivates the backlight function.
In user programs, you can select the key to be used for activating or deactivating the backlight
function (instead of the initial setting: combination of SF and M4), as well as modifying the
ON-duration of the backlight before the automatic turning-off.
Backlight OFF
(The backlight
function is OFF
when you turn the
BHT power on.)
Press the right-hand
trigger switch while
holding down SF.
Right-hand
trigger switch (M4)
Backlight ON
If no key is
pressed for at
least 3 seconds.
SF key
Backlight OFF
(The backlight
function is kept ON.)
5
Chapter 1 Quick Guide
Press the
right-hand trigger
switch while
holding down SF.
Press any key (except for
the simultaneous depression
of the right-hand trigger
switch and SF) or tap the
touch panel.
Press the right-hand
trigger switch while
holding down SF.