Denso BHT-100BW-CE User Manual page 84

Setting the RF options
Setting the WEP keys
Tapping the Option tab on the NIC Control menu displays the screen
shown at left.
You can set the following:
Power:
International Roaming:
For details about the parameters above, refer to Chapter 3, Section
3.1.2 "RF-Related Parameters."
Tapping the WEP tab on the NIC Control menu displays the screen
shown at left.
You can set the following:
WEP: Sets the authentication system when the WEP is
enabled.
Key 1 to 4: Defines four types of encryption keys--WEP
keys 1 to 4.
Transmit Key: Activates any one of the WEP keys 1 to 4 already
defined.
To enable the encryption with an WEP key, choose "Shared" in the
WEP box.
For Transmit Key, select an WEP key already defined.
For details about each parameter, refer to Chapter 3, Section 3.1.2,
"RF-Related Parameters."
71
Chapter 2 Getting Started the BHT and System Menu
Selects the power mode for the
wireless module.
This check box should always be
cleared.