Communicating With The Host Computer; Setting The Transmission Speed Of The Cu-7000 - Denso BHT-100BW-CE User Manual

5.4

Communicating with the Host Computer

5.4.1

Setting the Transmission Speed of the CU-7000

Set the transmission speed of the CU-7000 to the same value as that of the BHT and the host computer,
by using the DIP switch provided on the bottom of the CU-7000.
(1) Turn the CU-7000 upside down.
(2) Remove the protection sheet of the DIP switch from the CU-7000.
(3) Set the selectors of the DIP switch as shown below.
(4) Reinstall the protection sheet.
Do not set the DIP switch to any configurations other than one of the five shown above.
When removing the protection sheet, take care not to let any foreign material get into the CU.
Chapter 5 Handling the
107
CU-7000 (Option)