Using Ymodem - Denso BHT-100BW-CE User Manual

3.4.2 Using Ymodem

In System Menu and user programs, the BHT can use the Ymodem protocol with the following
communications parameters:
Port
Transmission Speed
Character Length
Vertical Parity
Stop Bit Length
It is impossible to open both the IrDA interface and direct-connect interface ports concurrently.
In System Mode
Refer to Section 2.4.4, "[ 2 ] Communication Menu."
In BHT-BASIC
Refer to the "BHT-100BW-CE API Reference Manual."
IrDA interface
2400, 9600, 19200, 38400,
57600, or 115200 bps
8 bits
None
1 bit
96
Direct-connect interface
300, 600, 1200, 2400, 4800, 9600,
19200, 38400, 57600, or 115200 bps
8 bits
Odd, even, or none
1 or 2 bits