Denso BHT-100BW-CE User Manual page 113

⇓
The partnership between the host computer and BHT has been set up.
For instructions on how to use ActiveSync, refer to its Help on the host computer.
For debugging of user programs using ActiveSync, refer to the "BHT-100BW-CE API Reference
Manual."
In spread spectrum communication
Like ActiveSync in IrDA communication, ActiveSync in spread spectrum communication requires a
partnership between the host computer and BHT to be set up. Set up the partnership according to the
operating procedure in IrDA communication given on the previous page.
For the operating procedure of ActiveSync on the BHT, refer to Chapter 2, Section 2.4.4, "[2.3]
ActiveSync (RF)."
Depending upon the PC name (e.g., the PC name begins with a numeral), ActiveSync may not run in
spread spectrum communication. It is recommended that the PC name be set with alphabets (A to Z
and a to z) only.
To synchronize files, select the Files check box and then
click Next.
Click Finish to complete the setup.
100