Denso BHT-100BW-CE User Manual page 77

Beeper/Vibration switching menu
Display setup menu
Switching the screen size
Choosing "2:Beeper/Vibration" on the Device menu calls up the
screen shown at left.
You can select any of the following three ways as a confirmation of
completion of barcode reading.
Beeper:
Vibration:
Beeper/Vibration:
Choosing "3:Display" on the Device menu calls up the screen shown
at left.
[1] Screen Size:
[2] LCD Contrast:
[3] Calibration:
[4] Status Display:
Choosing "1:Screen Size" on the Display setup menu calls up the
screen shown at left.
You can select either of the following two screen sizes:
NORMAL:
REDUCTION:
64
Beeping only
Vibrating only
Both beeping and vibrating
Opens the screen size menu.
Opens the LCD
screen.
Opens the touch screen calibration screen.
Opens the status indicator on/off menu
In regular size (default)
In reduced size (from 240- to 200-dot width)
contrast adjustment