Denso BHT-100BW-CE User Manual page 40

Cold-booting the BHT
If a problem persists even after warm-booting the BHT, cold-boot the BHT.
Cold-booting the BHT will erase all data stored in the RAM. It is recommended that important data be
saved into the FLASH folder or host computer.
Cold booting procedure
Turn the BHT off. While holding down the reset button with the stylus, press the PW key for approx. one
second and release both buttons. The BHT will start after cold booting.
Contents of the memory after warm-/cold-booting the BHT
Data in the FLASH folder
Data in other folders
Contents of the Registry
Data being edited
* If the Registry has been backed up, the backup will apply. For the backup procedure, refer to Section
2.3.4, "[ 2 ] Backing up the Registry."
Chapter 2 Getting Started the BHT and System Menu
After warm booting
Retained
Retained
Retained
Erased
27
After cold booting
Retained
Erased
Erased*
Erased