3.5.2 Connection Using ActiveSync
In IrDA communication
Arrange the host computer and BHT with their IrDA ports facing directly each other as shown below.
No ActiveSync can be used for connection via the CU-7000.
For the operating procedure of ActiveSync on the BHT, refer to Chapter 2, Section 2.4.4, "[2.2]
ActiveSync (IrDA)."
- Setting up a partnership
⇓
⇓
Chapter 3 Communications Operations of BHT-100BW-CE
IrDA communication
Upon completion of connection between the host
computer and BHT, the host computer displays the
screen shown at left.
On this screen, set up a partnership between the host
computer and BHT.
Click the Yes radio button and then click Next.
Type an arbitrary BHT name in the Device name box and
click Next.
99