Denso BHT-100BW-CE User Manual page 48

Network Configuration
On the Control Panel window, double-tap Network, and the Network Configuration window appears.
⇓
Tap the Adapters tab to display the window shown at left.
To configure the wireless driver, select "SLA41ND41" and tap the
Properties button. The SLA41ND41 Ethernet window appears.
In the SLA41ND41 Ethernet window, you can set up an IP address
and name server of the wireless driver.
Tap the Identification tab to display the window shown at left.
You can specify a user name, password and domain required to
access the network resource.
35
Chapter 2 Getting Started the BHT and System Menu