Check Every 140 Hours (Once a Week)
1E4C-434P
1E4C-435P
1E4C-436P
1E4C-437P
To the next page
Page 1-34
9.
Block
10.
Side rubber
Blade
11.
Remove the block in the printing unit
upward and clean the remaining
solder in the unit and the block with
the cleaning jig.
∗ Don't use metallic spatula, the printing unit will
be damaged.
Remove the cover for storage after
turning up and down and setting the
printing unit to the maintenance jig.
Remove the side rubber and the
blade.
• How to remove the side rubber and the blade
3-2-2 Changing the Cartridge Unit (Option)
and the Blade
3-2-3 Changing the Cartridge Unit (Option)
and the Side Rubber
1E4C-E-MMA01-A06-01