Check Every 1500 Hours (Once Three Months)
1-7-3
Cleaning and Lubricating the X-Y Table (X and Y-axis Linear Bearing)
Tools
Hexagon Allen wrench
1B4C-405P
1E4C-404E
To the next page
Page 1-56
Cover
Required time
15 to 20 minutes
1.
Turn off the power.
2.
Open the front, center and rear safety
covers, and the rear cover.
3.
Open the cleaning unit.
Center safety cover
Cleaning unit
4.
Take out the cover.
∗ Remove 4 hexagonal bolts, and remove the
cover by sliding it out of the front side of the
machine.
1E4C-E-MMA01-A09-00