HOW TO SEE DESCRIPTION FOR OPERATION
The description depends on each page, but the basic structure is as follows.
Title
1-1-1
Starting Production
MARKS USED IN THIS MANUAL
In this manual, following marks are used for description.
: This shows pressing a key on the
Return to origin
touch panel.
UNLOCK
START
: This means pressing
START
on the operating panel within
2 seconds.
+
: This means pressing the key B
A
B
while holding the key A.
1E4C-E-XXA00-A04-00
UNLOCK
and then
1. Press
.
Production
• "Return to origin" for all axes are carried out.
Operating step number
Supplementary description
: These show operation flow.
: This shows the reference item.
: This shows the operation by
engineers.
Engineer
: This shows the operation by
operators.
Operator
Actual operation
Page 37
4