1-3-3
Cleaning the Squeegee Holder (After Operation)
Clean the squeegee holder after operation. Remaining solder on this part may cause deterioration
of the squeegee rubber and prevent quality printing.
Tools
OFF (
To the next page
1E4C-E-MMA01-A05-01
SERVO
) ON (
)
Check Every 24 Hours (Routine)
Required time
5 minute
1.
Press
at the Main menu.
Machine
adjust
• The "Machine Adjustment" menu appears.
UNLOCK
2.
Press
+ Squeegee open/close .
• The "Squeegee Open/Close" screen appears.
UNLOCK
3.
Press
+ SQ. open (squeegee
exchange).
• The squeegee opens.
4.
Turn off the servo switch.
5.
Open the front safety cover.
1
Page 1-19