1-7-5
Cleaning and Lubricating the Y-axis Linear Bearing of Mask Cleaning
The unit vacuums the solder clogged in the mask opening and cleans the back side of the mask.
Tools
1E4C-406E
1E4C-E-MMA01-A09-00
Y-axis linear bearing
Check Every 1500 Hours (Once Three Months)
Required time
3 to 4 minutes
1.
Turn off the power.
2.
Open the front and center safety
covers.
3.
Clean and lubricate the linear bearing.
1.Y-axis linear bearing
Lubricate the grease nipple.
1
Page 1-59