Panasonic KXF-1E4C Operating Instructions Manual page 72

Check Every 24 Hours (Routine)
OFF (
1B4C-402P
OFF (
2
1
To the next page
Page 1-22
SERVO
) ON ( )
SERVO
) ON ( )
1B4C-EEn-MaPt-002
4.
Turn off the servo switch.
5.
Open the front safety cover.
6.
Clean the clamp claw, support plate,
and recognition hole of board posit-
ing unit.
∗ Clean with a cloth soaked with IPA or ethanol.
∗ Clean the recognition hole with the jig.
Cleaning jig for recognition hole
1B4C-439E
7.
Close the front safety cover.
8.
Turn on the servo switch.
UNLOCK
9.
Press + Front .
• The X-Y table moves to the origin position.
UNLOCK
10.
Press + Rear .
• The X-Y table moves to the back side of the
machine.
1E4C-E-MMA01-A05-01