1E4C-450P
1E4C-451P
1E4C-452P
1E4C-434P
To the next page
1E4C-E-MMA01-A06-02
Check Every 140 Hours (Once a Week)
5.
Put the cover for Maintenance (for
keeping unit) to the printing unit.
• Put the cover below by sliding it from the side.
6.
Remove the plate. (Four truss screws)
Plate
Screw
7.
Remove the O-ring.
O-ring
8.
Remove the solder in the unit with the
cleaning jig.
∗ Don't use metallic spatula, the printing unit will
be damaged.
∗ After cleaning, dispose of the collected solder.
1 1
Page 1-33