Panasonic KXF-1E4C Operating Instructions Manual page 75

1-3-6 Checking for Wear and Damage on the Blade and the Side Rubber (Before Operation)
Before operation, check for wear or damage on the side rubber and the blade of the cartridge head
(option).
Tools Maintenance jig
1E4C-412P
1E4C-438P
Side rubber
1E4C-E-MMA01-A05-00
Required time
1.
2.
Cover for storage
3.
Side rubber
Blade
Check Every 24 Hours (Routine)
1 to 2 minutes
Set the printing unit to the mainte-
nance jig
Remove the cover for storage by
sliding it out.
Check for wear and damage on the
blade and the side rubber visually.
∗ If wear or damage can be found, change the
blade and the side rubber.
"3-2-2 Changing the
"3-2-3 Changing the Side
Blade"
Rubber"
Page 1-25
1