Panasonic KXF-1E4C Operating Instructions Manual page 48

DISPOSING OF THE AIR SPRING
This equipment uses the air spring to open/close covers. It is very dangerous to dispose of it as it
is, because high-pressure air is sealed into it. Before disposing of it, be sure to bleed it of the air.
Position to use the air spring
1E4C-AA00
Removing the air spring
Turn the bolt with hexagonal hole counterclockwise, and remove the spring.
Discharging of the air spring
Drill the spring and discharge the air in it completely.
As crashed chips and oil discharge when the air is coming out, use safety glasses
for protection.
Position to drill the air spring
ABOUT DISPOSAL OF COMPONENTS CONTAINING MERCURY
This product has a fluorescent lamp that contains a small amount of mercury.
It also contains lead in some components. Disposal of these materials may be
regulated in your community due to environmental considerations.
For disposal or recycling information please contact your local authorities, or the
Electronics Industries Alliance.
Page 36
Bolt with hexagonal hole
NOTICE
15 mm to 20 mm
Hole
NOTICE
1D4C-406E
1B4C-442E
1E4C-E-XXA00-A04-00
Air spring