Check Every 560 Hours (Once a Month)
1-5-4
Checking the MR Unit
Tools
BEFORE INSPECTING PNEUMATIC EQUIPMENT, CUT OFF THE AIR SUPPLY
AND EXHAUST AIR FROM THE COMPONENTS.
You will have serious injury if the residual pressure actuates the machine.
Before inspecting pneumatic equipment, cut off the air supply and exhaust the air from the equipment.
Switch OFF the power.
M02EB
1E4C-AB00
Handle operation
Handle
001EC1_M03
Page 1-42
WARNING
1. Unlock
2. Adjust
3. Lock
Water receiver
Required time
1 minute
1.
Check the air pressure.
∗ Air pressure range
0.49 MPa to 0.78 MPa.
∗ If it is out of range, adjust it with the handle.
Pressure gauge
2.
Check the water receiver.
∗ Empty the water in the receiver.
1E4C-E-MMA01-A07-00