SAFETY PRECAUTIONS
Observe the following items before placing your hand or other part of your
body in an active part of the machine in order to feed production material,
change machine set-up, or adjust machine settings.
You may be injured if the machine is actuated. Also you may be struck by an electric shock.
There are three levels of procedure, shown below, for each kind of work.
For repairing the control box. ----------------------------------
This is used to turn off power supply normally. -----------
For replacing the control part such as the sensor
For disassembling or replacing parts
For changing production board and daily inspection ----
For placing or removing board on the conveyor
For setting production materials such as the feeder
SP28P-DHU/DU (The explanation by using SP28P-DH illustration)
Cutting of the power
1
supply of the machine.
Turn off the breaker
to which the ma-
chine is connected.
M73EB
Page 6
WARNING
Turn off the power.
2
1E4C-AA00
Be sure to observe
1
Cutting off the power suly of the machine.
2
Power supply OFF
3
Servo switch OFF
3
Turn off the servo
switch.
Front panel
START
STOP
UNLOCK
STEP
LIGHT ON
SELECT
KEY LOCK
BACK LIGHT OFF
SERVO
OFF (
) ON ( )
1E4C-E-XXA00-A03-00