Comtech EF Data PCB-4000A Installation And Operation Manual page 62

Command
Command
Parameter
(Instruction Valid for
Type Code and PCB or
SSPA
qualifier)
SNMP Write WCM= PCB
Community
String
IP Address IPA= PCB
IP Gateway IPG= PCB
MAC Address N/A N/A
Ping Reply PNG= PCB
Enable
Serial Remote Control
Arguments for
Description of Arguments
Command or
(Note that all arguments are ASCII numeric codes – i.e.,
Response to
ASCII codes between 48 and 57)
Query
Up to 20 Command or Query.
characters, no
Sets or returns the SNMP Write Community string.
spaces
Example: WCM=private
Notes: Empty string is not allowed
18 bytes Command or Query.
numerical
Used to set the IP Address and network prefix for the 10/100
Base T Ethernet management port, in the form
aaa.bbb.ccc.ddd.yy, where permitted ranges are:
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 001-255
yy=08-30
Example: IPA=010.006.030.001.24
Default: 192.168.1.4.24
15 bytes Command or Query.
numerical
Used to set the IP Gateway Address for the Ethernet
management port, in the form aaa.bbb.ccc.ddd, where
permitted ranges are:
aaa = 0-223
bbb = 0-255
ccc = 0-255
ddd = 001-255
Example: IPG=010.006.030.001
Default: 192.168.1.5
12 bytes, alpha- Query only.
numerical
Used to query the unique MAC Address for the modem.
Example: MAC=0006B00001C2
1 byte, value of Command or Query.
0 or 1
Used to Enable or Disable Ping reply in the form x, where:
0=Disable Ping Reply
1=Enable Ping Reply
Response to
Command
(Target to
Controller)
WCM=
WCM?
WCM#
IPA=
IPA?
IPA*
IPG=
IPG?
IPG*
IPG#
N/A
PNG=
PNG?
PNG*
5–14
PCB-4000A 1+1 Phase Combiner
Revision 2
Query Response to
Query Valid
Query
(Instruction
for PCB or
Code and (Target to
SSPA
qualifier) Controller)
WCM? PCB WCM=x...x
(see
Description of
Arguments)
IPA? PCB IPA=
aaa.bbb.ccc.dd
d.yy (see
Description of
Arguments)
IPG? PCB IPG=
aaa.bbb.ccc.dd
d
(see
Description of
Arguments)
MAC? PCB MAC=aabbccd
deeff
(see
Description of
Arguments)
PNG? PCB PNG=x
(see
Description of
Arguments)
MN-PCB-4000A