Figure 4-5. Temporary Folder Setup Using Windows Command Line - Comtech EF Data PCB-4000A Installation And Operation Manual

d. Use Windows Command-line to create the temporary folder.
•
First, click [Start] on the Windows taskbar, and then click the 'Run...' icon (or,
depending on Windows OS versions prior to Windows 95, click the 'MS-DOS
Prompt' icon from the Main Menu).
•
Next, open a Command-line window...
o
o
o
o

Figure 4-5. Temporary Folder Setup using Windows Command Line

There should now be a "temp" folder created and available for placement of the firmware file
download.
Updating Firmware
For Windows 95 or Windows 98 – Type "command".
For any Windows OS versions later than Windows 98 – Type "cmd" or
"command".
Alternately, from [Start], select All Programs > Accessories > Command
Prompt.
Finally, from the Command-line 'c:\>' prompt, type "mkdir temp" or "md temp"
(mkdir and md stand for make directory), and then click [OK].
PCB-4000A 1+1 Phase Combiner
4–5
Revision 2
MN-PCB-4000A