Table of Contents
Advertisement
2. Extract the firmware files from the archive file.
a. (If not already done with File Download > [Open]) Extract the firmware files from the
downloaded *.exe or *.zip archive file with the user-supplied utility program:
b. Double-click on the archive file name, and then follow the prompts provided by the user-
supplied utility program. Extract, at a minimum, four files:
•
FW-0021045*_Bulk_v*_*_*.zip, where "*_*_*" is the version (bulk image file).
•
FW10874-2-.mib (Comtech EF Data MIB file)
•
FW-0021047*.mib (PCB-4X00A MIB file), where "*" is the revision.
•
PCB-4X00A_ReleaseNotes_v*_*_*.doc, where "*" is the version (release notes).
3. Confirm availability of the firmware files in the temporary folder.
There are several ways you may view the contents of the temporary folder on a Windows-
based PC.
a. From the Windows Desktop:
•
Double-left-click the "temp" folder saved to the Windows Desktop.
•
Use Windows Explorer to locate, and then double-left-click the "temp" folder.
•
Use the 'Browse' window ([Start] > ...Run > [Browse]) to locate, and then double-
click the "c:\temp" folder.
b. Using Command-line:
•
Type "cd c:\temp" at the Command-line prompt to change to the temporary directory
created earlier using Command-line.
•
Type "dir" to list the files extracted to the temporary directory from the downloaded
archive file.
The firmware files have been successfully downloaded and are now
available for transfer to the PCB-4000A.
Updating Firmware
Figure 4-6. Download Firmware Archive File
4–7
PCB-4000A 1+1 Phase Combiner
Revision 2
MN-PCB-4000A
Advertisement
Table of Contents
