Rf Interface Connectors; Rf In 1 | J7 And Rf In 2 | J8 Connectors; Sspa Out 1 | J9 Connector; Sspa Out 2 | J10 Connector - Comtech EF Data PCB-4000A Installation And Operation Manual

2.4

RF Interface Connectors

2.4.1

RF IN 1 | J7 and RF IN 2 | J8 Connectors

2.4.2

SSPA OUT 1 | J9 Connector

2.4.3

SSPA OUT 2 | J10 Connector

External Connectors
The Type 'N' RF IN 1 | J7 and RF IN 2 | J8 connectors serve as
RF signal input interfaces to the PCCB. Note that:
•
The PCCB selects the RF IN 1 | J7 input when the RF INPUT
SWITCH | J6 POS1 Signal Function is activated.
•
The PCCB selects the RF IN 2 | J8 input when the RF INPUT
SWITCH | J6 POS2 Signal Function is activated.
The Type 'N' SSPA OUT | J9 connector, located on the left side panel of the
PCCB, provides the RF signal output from the PCCB to SSPA #1.
The Type 'N' SSPA OUT 2 | J10 connector, located on the right side panel
of the PCCB, provides the RF signal output from the PCCB to SSPA #2.
PCB-4000A 1+1 Phase Combiner
2–6
Revision 2
MN-PCB-4000A