Comtech EF Data PCB-4000A Installation And Operation Manual page 57

Command
Command
Parameter
(Instruction Valid for
Type Code and PCB or
SSPA
qualifier)
Concise N/A N/A
Alarm Status
Concise N/A N/A
Configuration
Status
Circuit CID= PCB
Identification
Concise N/A N/A
Maintenance
Status
Serial Remote Control
Arguments for
Description of Arguments
Command or
(Note that all arguments are ASCII numeric codes – i.e.,
Response to
ASCII codes between 48 and 57)
Query
11 bytes Query only.
numerical with
Used to Query the Alarm status of the unit, response is comma
commas
delimited.
Example: CAS=a,b,c,d,e,f,g'cr''lf' where:
a thru k = 0 or 1, 0 = OK 1 = FT
a = +24V Power Supply
b = +5V Power Supply
c = SSPA1
d = SSPA2
e = reserved
f = SW1 Absent FLT
g = SW2 Absent FLT
24 bytes Query only.
numerical Used to query the summarized version of RCS.
Example: CCS=aa.aa,b,c,d,e,f,g'cr''lf' where:
aa.aa = attenuation in dB
b = RF power amplifier state
c = mute state
d = redundancy/phase combine mode
e,f,g = SSPAs fault status (g is reserved (X))
24 bytes, Command or Query.
alphanumeric Used to identify or name the unit or station. First line is limited
to 24 characters. Second line is also limited to 24 characters.
No carriage return between first line and second line.
16 bytes Query only.
numerical
Used to Query the Maintenance status of the unit in concise
format. Response is comma delimited.
Example: CMS=aa.a,b.b,c.c,d.d'cr''lf' where:
aa.a = +24V Power Supply
b.b = +5V Power Supply
c.c = +3.3V Power Supply
d.d = +1.5V Power Supply
Response to
Command
(Target to
Controller)
N/A
N/A
CID=
CID?
N/A
5–9
PCB-4000A 1+1 Phase Combiner
Revision 2
Query Response to
Query Valid
Query
(Instruction
for PCB or
Code and (Target to
SSPA
qualifier) Controller)
CAS? ALL CAS=x....x
(Check (see
SSPA Description of
manual for Arguments for
arguments details)
returned
from SSPA)
CCS? SSPA CCS=x....x
(per MBT (see
manual) Description of
Arguments for
details)
CID? ALL CID=x...x
(see
Description of
Arguments for
details)
CMS? ALL CMS=x....x
(Check (see
SSPA Description of
manual for Arguments for
arguments details)
returned
from SSPA)
MN-PCB-4000A