Comtech EF Data PCB-4000A Installation And Operation Manual page 60

Command
Command
Parameter
(Instruction Valid for
Type Code and PCB or
SSPA
qualifier)
Redundancy RED= PCB
/Phase
Combine
Mode
Retrieve
N/A N/A
Equipment
Type
Retrieve N/A N/A
Maintenance
Status
Serial N/A PCB
Number
Retrieve N/A N/A
Utility Status
Remote Baud SBR= PCB
Rate
Serial Remote Control
Arguments for
Description of Arguments
Command or
(Note that all arguments are ASCII numeric codes – i.e.,
Response to
ASCII codes between 48 and 57)
Query
1 byte, Command or Query.
value of 0, 1,2,3 Set the redundancy/phase combine mode.
0 = Off
1 = 1:1 Phase combined
2 = reserved
3 = reserved
4 = reserved
35 bytes, Query only.
alphanumeric The unit returns a string indicating the Model Number and the
value of internal software revision installed.
Example: PCB-4000A Phase Combiner Ver: 1.1.1
42 bytes, Query only.
alphanumeric
Used to Query the maintenance status of the unit.
P24VT=23.5'cr'
P05VT=4.8'cr'
P03VT=3.3'cr'
P01VT=1.5'cr''lf'
9 bytes, Query only.
numerical
Used to Query the units 9 digit serial number.
000000000 to
Slave returns its S/N, in the form xxxxxxxxx.
999999999
Example: RSN=000000165
17 bytes
Query only.
alphanumeric
Used to Query the utility status of the unit
Example: RUS='cr'
ADR=0001'cr'
BDR=9600'cr''lf'
4 bytes Command or Query.
Set remote baud rate as follows:
9600 = 9600 baud
19K2 = 19200 baud
Response to
Command
(Target to
Controller)
RED=
RED?
N/A
N/A
N/A
N/A
SBR=
SBR?
SBR#
5–12
PCB-4000A 1+1 Phase Combiner
Revision 2
Query Response to
Query Valid
Query
(Instruction
for PCB or
Code and (Target to
SSPA
qualifier) Controller)
RED? PCB RED=x
(see
Description of
Arguments for
details)
RET? ALL RET=x....x
(see
Description of
Arguments for
details)
RMS? ALL RMS=x....x
(Check (see
SSPA Description of
manual for Arguments for
arguments details)
returned
from SSPA)
RSN? ALL RSN=xxxxxxxx
x
(see
Description of
Arguments for
details)
RUS? ALL RUS=x....x
(Check (see
SSPA Description of
manual for Arguments for
arguments details)
returned
from SSPA)
SBR? PCB SBR=xx
(see
Description of
Arguments for
details)
MN-PCB-4000A