Table of Contents
Advertisement
Chapter 5. SERIAL REMOTE CONTROL
5.1
Overview
Remote monitor and control of the PCB-4000A 1+1 Phase Combiner is available only through an EIA-232 connection, and data is
transmitted in asynchronous serial form using ASCII characters. Control and status information is transmitted in packets of variable length,
in accordance with the structure and protocol defined in later sections.
5.1.1
EIA-232
The Controller device connects directly to the Target via a two-wire-plus-ground connection. Controller-to-Target data is carried, via
EIA-232 electrical levels, on one conductor, and Target-to-Controller data is carried in the other direction on the other conductor.
Serial Remote Control
5–1
PCB-4000A 1+1 Phase Combiner
Revision 2
MN-PCB-4000A
Advertisement
Table of Contents
