Figure 4-3. Temporary Folder Setup Using Windows Explorer; Figure 4-4. Temporary Folder Setup Using 'Run' And 'Browse - Comtech EF Data PCB-4000A Installation And Operation Manual

b. Use Windows Explorer to create and rename the temporary folder.
•
Select File > New > Folder to create the temporary folder. The new folder will be
created in the active folder.
•
Right-click the "New Folder" folder name, and then rename this folder to "temp" or
some other convenient, unused name.
c. Use the 'Run' and 'Browse' windows to create and rename the temporary folder.
•
Select [Start] on the Windows task bar, and then click the Run... icon. The 'Run'
window will open.
•
Click [Browse] in the 'Run' window. The 'Browse' window will open.
•
Click the Create New Folder icon in the 'Browse' window. The new folder will be
created.
•
Right-click the "New Folder" folder name, and then rename this folder to "temp" or
some other convenient, unused name.
Updating Firmware

Figure 4-3. Temporary Folder Setup using Windows Explorer

Figure 4-4. Temporary Folder Setup using 'Run' and 'Browse'

PCB-4000A 1+1 Phase Combiner
4–4
Revision 2
MN-PCB-4000A