Installation; Introduction; Unpacking - Henny Penny LVE-202 Operation Manual

2-1. INTRODUCTION

2-2. UNPACKING

INSTRUCTIONS
Figure 1
Aug. 2012
SECTION 2. INSTALLATION
This section provides the installation and unpacking instructions
for the Henny Penny LVE fryer.
Installation of this unit should be performed only by a
qualified service technician.
Do not puncture the fryer with any objects such as drills
or screws as component damage or electrical shock could
result.
Any shipping damage should be noted in the presence of the
delivery agent and signed prior to his or her departure.
1. Cut and remove the metal bands from the carton.
2. Remove the carton lid and lift the main carton off the fryer.
3. Remove corner packing supports (4).
4. Cut the stretch film from around the carrier/rack box and
remove it from the top of the fryer lid.
5. Cut and remove the metal bands holding the fryer to the pallet.
• Do not remove shipping brace from right side of fryer until
unit is in final location as damage to fryer could result.
• Remove filter drain pan and JIB shelf from fryer before
removing fryer from pallet or damage to the unit could
result. Figure 1
6. Remove the fryer from the pallet.
Take care when moving the fryer to prevent personal
injury. The fryer weighs approximately 600 lbs. (272 kg)
to 800 lbs. (363 kg)
2-1
Model LVE-202, 203, 204
.
.