Auto Black Shading - Ikegami HDK-55 Operation Manual

4.6 Auto Setup

Auto Black Shading

This section explains how to activate auto black shading.
1
Set the AWB/ABB switch to ABB and hold it in
this position.
The lens iris is automatically closed, and auto black
balance is activated. After completion of auto black
balance, black shading starts automatically. You may
release your finger from the AWB/ABB switch when
the viewfinder screen display changes to "A.BLK
SHADE BLACK SHADE".
2
Check the result.
Upon completion of auto black shading, "OK" or "NG"
appears on the viewfinder screen.
Note:
- If auto black balance results in "NG", auto black
shading is discontinued.
- To discontinue auto black shading, set the AWB/
ABB switch to ABB again before the result is
displayed. The adjusted setting is cleared, returning
to the former status before auto black shading.
- To activate the auto black shading from an OCP,
press the ABB button in the camera function
operation part.
- To activate it from an MCP, press the Quick button
on the LCD, then press the ABB button.
68
HDK-55 1206 VER1 (U)
①
Set the AWB/ABB switch
to ABB and hold it in this
position.
ＡＢＢ
ＢＬＫ ＳＥＴ
Ａ.ＢＬＫ ＳＨＡＤＥ
ＢＬＡＣＫ ＳＨＡＤＥ
Ａ.ＢＬＫ ＳＥＴ
Ｏ Ｋ