Power Supply From Bs - Ikegami HDK-55 Operation Manual

3.3 Power Connection

Power Supply from BS

Explains how to supply power from the BSF-55.
AC INPUT connector
BSF-55 rear view
AC cable
1
Make sure the BSF-55 MAIN POWER switch is OFF.
2
Connect the AC cable to the AC INPUT connector on the rear of BSF-55.
3
Insert the AC plug into the power outlet.
4
Connect the BSF-55 and the camera via a fiber cable.
This completes the procedure for connecting power from the BSF-55 to the camera.
There are two methods of supplying power to the camera in this state:
- When operating the camera power source from the BS.
- When operating the camera power source from OCP (remote control).
48
Fiber cable
To the camera
Power outlet
HDK-55 1206 VER1 (U)