Operating Systems - Ikegami HDK-55 Operation Manual

1.2 Operating Systems

This product is equipped with functions which interface with a control panel and a control
unit. If you use BSF-55, this product can support not only stand-alone VTR shooting but
also various shooting styles such as studio shooting and field shooting as a system camera.
Furthermore, you can choose and operate each control panel to be connected to the BS, for
your purpose.
■ Example of Minimum Configuration of System Camera (1 camera, 1 OCP, 1 MCP)
Camera Head
Example of System Camera Configuration (Up to 8 cameras, 1 MCP)
■
Camera Head
BS-1
COMM
BS-8
PM
PM
PM
WFM
BS
WFM
WFM
WFM CONT
COMM
OCP
PM WFM
WFM
PM
CONT
WFM
PM
BS-1
WFM, COMM
BS-8
PM, WFM, COMM
HDK-55 1206 VER1 (U)
1.1 Features of This Product
Note:
Note:
OCP
Term:
MCP
Term:
PM WFM
OUT
CSU
IN
MCP
Term:
By using an SE-H700 system
expander together, this product
can operate as a full-scale studio
camera equipped with a 9-inch
viewfinder and a full studio lens.
For Minimum operating System,
no MCP needed when OCP-200
is used.
OCP (Operation Control
Panel)
This control panel is used for
normal operation. Typically one
OCP is dedicated to one camera
chain.
MCP (Maintenance Control
Panel)
This control panel is used for
the maintenance and precise
adjustment of the camera in
studio shooting. By using a
memory card, you can save the
shooting condition on memory
and make setup easily. By using a
CSU together with an MCP, you
can maintain up to 32 cameras.
CSU (Camera Select Unit)
Used when controlling multiple
cameras. With using a MCP,
one CSU can control up to 8
cameras, and contains terminals
through which video is output
on the monitor from the selected
camera.
5
1 1