Ikegami HDK-55 Operation Manual page 32

2.1 Camera and Viewfinder
⑲ AWB SELECT switch
Selects a memory for auto white balance. AWB settings can be stored in two memories,
A-ch and B-ch, so they can be selectively used depending on different conditions.
A : A-ch memory
B : B-ch memory
OFF : White balance adjustment is in the preset condition (3200K).
⑳ OUTPUT SELECT switch
Switches between the picture shot by the camera and the color-bar signal.
CAM : Outputs the picture shot by the camera to the viewfinder or monitor.
BARS : Outputs the color-bar signal to the viewfinder or monitor.
GAIN SELECT switch
○
21
Selects the gain of the camera.
O : Normally selected (0dB value).
M : Gain value set by the menu is obtained. The set value is -6dB, -3dB, +3dB, +6dB
+9dB or +12dB.
H : Gain value set by the menu is obtained. The set value is -3dB, +3dB, +6dB, +9dB
+12dB or +18dB.
16
HDK-55 1206 VER1 (U)
Note:
The gain value of +24dB or more
is optional.