Ikegami HDK-55 Operation Manual page 113

Note:
The images of the storage range for files are shown in the figure below.
■ Reading the camera setting condition from the memory card.
Read the camera setting condition from the memory card.
1
Turn the rotary pulse switch on MENU (2/3) to
adjust the cursor to [MEMORY CARD] and press
the SET button.
The submenu is displayed.
2
Select [LOAD FILE] and press the SET button.
The LOAD FILE submenu is displayed.
3
Select the item you which to read to the camera
from the LOAD FILE submenu.
In the figure, [SCENE] is selected.
4
After selecting the item to be read to the camera,
press the SET button.
Then select whether to read all files or individual
files from No. 1 to No. 8. In the example in the
figure, No. 8 is selected. Then select a file stored
on the memory card.
After the contents are determined, [PUSH SET ->
START] is displayed. Press the SET button.
If you wish to cancel, turn the rotary pulse switch
when [PUSH SET -> START] is displayed.
Note:
SCENE FILE, LENS FILE, MENU DATA is about, it
is possible to select individual data (ALL) or all data.
-SCENE : ALL , NO.1-NO.8
-LENS FILE : ALL , NO
-MENU DATA : ALL , VF
ALL FILE
SNAPSHOT FILE
Parameters for adjusting
functions and ON/OFF state.
SCENE FILE
REFERENCE FILE
(ABB/AWB)
LENS FILE
MENU FILE
HDK-55 1206 VER1 (U)
5.3 Using the Memory Card
ＭＥＭＯＲＹ ＣＡＲＤ
Ｓ Ａ Ｖ Ｅ Ｆ Ｉ Ｌ Ｅ
Ｌ Ｏ Ａ Ｄ Ｆ Ｉ Ｌ Ｅ
ＬＯＡＤ ＦＩＬＥ
Ａ Ｌ Ｌ Ｄ Ａ Ｔ Ａ
Ｓ Ｎ Ａ Ｐ Ｓ Ｈ Ｏ Ｔ
Ｓ Ｃ Ｅ Ｎ Ｅ Ａ Ｌ Ｌ
Ｒ Ｅ Ｆ Ｅ Ｒ Ｅ Ｎ Ｃ Ｅ
Ｌ Ｅ Ｎ Ｓ Ａ Ｌ Ｌ
Ｍ Ｅ Ｎ Ｕ Ｄ Ａ Ｔ Ａ Ａ Ｌ Ｌ
ＬＯＡＤ ＦＩＬＥ
Ａ Ｌ Ｌ Ｄ Ａ Ｔ Ａ Ｎ Ｏ .8 Ａ Ｂ Ｃ Ｄ Ｅ Ｆ Ｇ Ｈ .Ｃ Ｄ Ｆ
Ｓ Ｎ Ａ Ｐ Ｓ Ｈ Ｏ Ｔ
Ｓ Ｃ Ｅ Ｎ Ｅ
Ｒ Ｅ Ｆ Ｅ Ｒ Ｅ Ｎ Ｃ Ｅ
Ｌ Ｅ Ｎ Ｓ Ａ Ｌ Ｌ
Ｍ Ｅ Ｎ Ｕ Ｄ Ａ Ｔ Ａ Ａ Ｌ Ｌ
ＰＵＳＨ ＳＥＴ→ＳＴＡＲＴ
5
97