Ikegami HDK-55 Operation Manual page 39

⑬ HD SDI OUT connector
Outputs the HD-SDI signal to an external system. It can be used as the main line signal
connector when the camera is self-contained and it can be used as the MON OUT connector
when the camera is connected to the BS.
⑭ REMOTE connector
Connects a remote control panel (OCP, MCP, or RCP) to send or receive various control
signals when the camera is self-contained.
⑮ DC IN connector
Connects the external power to supply +12V DC power to the camera.
⑯ AUX OUT connector
Outputs the Q-TV and VBS signals.
Select the Q-TV and VBS signals from the camera menu screen. The Q-TV signal output
function only responds during BS operation.
⑰ System expansion connector
Connects the camera and system expansion equipment such as SE-H700.
⑱ MIC-2 connector
Connects microphone and input audio signals of line level.
⑲ MIC-1 connector
Connects microphone and input audio signals of line level.
○
MIC-2 POWER switch
20
Selects the type of power supplied to the microphone connected to the MIC-2 connection.
The settings depend on the type of microphone used.
+12V : Supplies +12V AB power
OFF : Supplies no power. Applicable for a dynamic microphone or a microphone with
built-in battery which requires no power supply
+48V : Supplies +48V Phantom power
○ MIC-1 POWER switch
21
Selects the type of power supplied to the microphone connected to the MIC-1 connection.
The settings depend on the type of microphone used. Its settings are identical to the MIC-2
POWER switch.
○
DC OUT connector
22
DC 12V (0.5A) standard output connector for miscellaneous use
○ Q-TV/GL, MON OUT connector
23
Outputs the signal selected by the Q-TV/GL, MON OUT SELECT switch.
● When set to Q-TV/GL
Select the Q-TV and VBS signals from the camera menu screen. Outputs the analog video
signal which is input to the Q-TV connector on the rear of the BS. The Q-TV, VBS video
signal output function is available only when the camera is connected to the BS.
Inputs a PS/S signal (tri-state sync) as external synchronization signal input (GENLOCK
input). The external synchronization signal input is only available for the self-contained
camera.
● When set to MON OUT
Outputs the monitor signal. Select the MON, SYNC signals from the camera menu screen.
○
Q-TV/GL, MON OUT SELECT switch
24
Selects the type of signal which is output from the Q-TV/GL, MON OUT connector.
HDK-55 1206 VER1 (U)
2.1 Camera and Viewfinder
2 2
23