Bs Connection; Connecting Camera And Bs - Ikegami HDK-55 Operation Manual

3.5 BS Connection

3.5 BS Connection
This section explains how to connect the HDK-55 to the BS. BSF-55 is used here as an example.
Two types of fiber cables are available in different shapes.
- Fiber cable (2-core single mode)

Connecting Camera and BS

1
Connect the CAMERA connector on the rear of the BSF-55 to the CAMERA connector on the rear of the
camera via a fiber cable.
CAUTION:
- The fiber cable has a male plug connector on one end and a female plug connector on the other end. Be sure to connect the
female plug connector to the camera and the male plug connector to the BS.
- Secure the fiber cable with the CAMERA CABLE clamp on the left side of the camera to remove any slack. Refer to
"SAFETY PRECAUTIONS" described at the beginning of this manual for how to secure the cable with the cable clamp and
how to handle the fiber cable.
52
: Diameter 9.2mm or 16mm, Maximum length 2000m (when BSF-55 is used)
Camera rear view
CAMERA connector
Fiber cable
BSF-55 rear view
HDK-55 1206 VER1 (U)
CAMERA connector