Using The Memory Card - Ikegami HDK-55 Operation Manual

5.3 Using the Memory Card

The memory card can be used to store/read the setting condition of the camera.
For the memory card, it is possible to use the SD/SDHC memory card with the following specifications.
-Memory capacity : SD card from 32 MBytes to 2 GBytes.
SDHC card from 4 GBytes to 32 GBytes.
-Format : Format meeting standards of SD/SDHC memory card.
CAUTION:
Market-sold memory cards have undergone sufficient confirmation of operation at this company. However, we cannot assume
any responsibility for guaranteeing operation.
Inserting and removing the memory card
■
There is a memory card slot as shown in the illustration below on the bottom left side of the camera main unit.
Open the dustproof cover and insert the memory card in the memory card slot.
Dustproof cover
＊＊＊ ＭＥＮＵ （1／３）＊＊＊
ＶＦ ＤＩＳＰＬＡＹ
ＶＦ ＤＴＬ
ＶＦ ＭＯＤＥ
ＦＯＣＵＳ ＡＳＳＩＳＴ
ＭＩＣ ＧＡＩＮ ＣＯＮＴＲＯＬ
ＲＥＴＵＲＮ ＳＥＬＥＣＴ ＭＯＤＥ
ＦＩＬＴＥＲ ＳＥＲＶＯ ＭＯＤＥ
ＳＷ ＦＵＮＣＴＩＯＮ
ＩＮＦＯＲＭＡＴＩＯＮ
When removing the memory card from the card slot, gently press the memory card until there is a clicking sound and then carefully
remove the card.
▲
If the camera is recognizing
the memory card normally,
the memory card mark is
displayed in the upper right
of the VF menu screen.
HDK-55 1206 VER1 (U)
5.3 Using the Memory Card
Memory card slot
Access indicator
*The metal terminal is facing down.
Metal terminal
Memory card front Memory card back
CAUTION:
When inserting the memory card in the slot, be sure
that the memory card is facing in the correct direction.
5
95