Ikegami HDK-55 Operation Manual page 58

3.2 Camera and Peripheral Installation and Connection
■ Removing the Lens
This section explains how to remove the lens.
Be sure to place the camera on a tripod or on a flat, level, stable surface when you remove the lens.
1
Disconnect the pigtail cable from the lens
connector.
Hold the connector of the pigtail cable and pull to
unlock and release it from the lens connector.
2
Remove the lens from the camera.
Rotate the lens lock lever Counter-clockwise to
the end stop and remove the lens from the camera
horizontally.
Support the lens with your hand to prevent it from
falling.
3
Remove the pigtail cable from the cable clamps.
4
Put the lens cap on to protect the lens from scratches.
42
①
Disconnect the pigtail cable.
HDK-55 1206 VER1 (U)
Rotate the lens lock lever
②
Counter-clockwise to the end
stop and remove the lens.