Ikegami HDK-55 Operation Manual page 60

3.2 Camera and Peripheral Installation and Connection
5
Adjust the viewfinder position.
Adjust the left and right positions of the
●
viewfinder
Turn the left-right lock lever on the camera
counterclockwise to unlock the viewfinder. Move the
viewfinder left and right to the desired position and
lock.
● Adjust the front and back positions of the
viewfinder
Loosen the front-back lock lever on the camera to
unlock the viewfinder. Move the viewfinder back and
forth to the desired position and lock.
Adjust the eyepiece angle
●
Move the eyepiece to a proper position so that the
image on the viewfinder is visible. The eyepiece
can be rotated 160 degrees upward and 90 degrees
downward. Adjust the eyepiece angle in accordance
with the camera angle.
Removing the Eyepiece
■
This section explains how to remove the eyepiece from the viewfinder.
1
Pull the eyepiece release lever and rotate the
eyepiece in the direction shown in the figure.
The eyepiece will be unlocked.
2
Pull out the eyepiece.
■ Attaching the Eyepiece
This section explains how to attach the eyepiece to the viewfinder.
1
Align mark on the viewfinder with
the eyepiece and insert the eyepiece into the
viewfinder.
2
Rotate the eyepiece in the direction shown in the
figure.
Rotate the eyepiece until it clicks. You will hear a click
sound when the eyepiece is locked to the viewfinder.
44
Adjusting the eyepiece angle
●
Eyepiece release lever
mark on
HDK-55 1206 VER1 (U)
0 to 250ﾟ
(Up:160ﾟ, Down:90ﾟ)
Front
Eyepiece
Pull
mark