Operating Procedures - Ikegami HDK-55 Operation Manual

4.1 Operating Procedures

This chapter explains how to operate the HDK-55 camera.
■
Initial Operation Check
――――――――――――――
When you use the camera for the first time after purchase, ensure that it works properly.
◆ Switch Position Check ･･･････････ (page 58)
◆ Turning ON Power ･･････････････ (page 60)
◆ Output Signal Check ････････････ (page 63)
- Color-Bar Signal Check
- Test Pulse Check (CAL Signal)
- Check by Use of External Chart
■
Preparation Before Shooting
―――――――――――――――――
◆ Viewfinder Adjustment ･･････････････ (page 62)
- Diopter Adjustment and Screen Adjustment
- Display Mode Check
◆ Output Signal Check ････････････････ (page 63)
- Color-Bar Signal Check
- Test Pulse Check (CAL Signal)
- Check by Use of External Chart
◆ Auto Setup ････････････････････････ (page 65)
<Pattern 1>
1 Auto Black Balance (ABB)
2 Auto White Balance (AWB)
■
Shooting Settings and Adjustment
――――――――――――――――――――
Make IRIS and pedestal adjustments and various function settings according to the environment in which the camera
is used.
◆ Camera menu settings
Refer to "5. CAMERA SETTINGS and ADJUSTMENT" (page 71).
◆ BS menu settings
Refer to the operation manual accompanying BSF-55 to be used.
<Pattern 2>
1 Black Shading
2 Auto White Balance (AWB)
(Execute one of the above patterns.)
HDK-55 1206 VER1 (U)
4.1 Operating Procedures
57
4