Ikegami HDK-55 Operation Manual page 65

■ To Control Power ON/OFF from BS
You can control the power ON/OFF of the camera from the BS.
5
Set the BS MAIN POWER switch on the front of the BS to "ON".
This turns on the power of the BS and lights the BS MAIN POWER indicator. In addition, the status of the camera cable
connection between the camera and the BS is automatically checked. When the connection status is determined as normal,
power is supplied to the camera, and the HEAD POWER indicator also lights.
BSF-55 front view
CAUTION:
To turn on the BS MAIN POWER switch just after the switch is turned off, wait one or more seconds before you turn on the power.
Repeating the on/off operation within one second activates the protector.
When the protector is activated, turn on the BS MAIN POWER switch after five or more seconds later.
BS MAIN POWER indicator
HEAD POWER indicator
BS MAIN POWER switch
HDK-55 1206 VER1 (U)
3.3 Power Connection
49
3