AKD PDMM User Guide | 17.16 Pulse / Direction signal connection
17.16 Pulse / Direction signal connection
1
The drive can be connected to a stepper-motor controller. Set parameters for the drive with EWV
. The
number of pulses can be adjusted, so that the drive can be adapted to match any stepper controller.
Speed profile and signal diagram
17.16.1 Pulse / Direction input 5 V (X9)
Connection to 5 V signal level stepper-motor controllers.
17.16.2 Pulse / Direction Input 5V (X7)
Connection industry standard 5V logic stepper-motor controllers with Pulse/Direction or Step/Direction
outputs. Note that the X7 opto inputs can work with 5V up to 24V logic and so these inputs can be driven
by 24V logic inputs as well.
1 Embedded Workbench Views
183
Kollmorgen™ | December 2012