Improper Device Modifications; Requirements For Special Applications - Siemens SIPART PS2 Operating Instructions Manual

Safety information

2.6 Requirements for special applications

Electromagnetic Compatibili‐
ty EMC
2004/108/EC
Atmosphère explosible
ATEX
94/9/EC
LVD 2006/95/EC
The applied standards can be found in the EC conformity declaration of the device.
See also
Certificates (http://www.siemens.com/processinstrumentation/certificates)
2.5

Improper device modifications

Improper device modifications
Danger to personnel, system and environment can result from modifications to the device,
particularly in hazardous areas.
● Only carry out modifications that are described in the instructions for the device. Failure
2.6 Requirements for special applications
Due to the large number of possible applications, each detail of the described device versions
for each possible scenario during commissioning, operation, maintenance or operation in
systems cannot be considered in the instructions. If you need additional information not
covered by these instructions, contact your local Siemens office or company representative.
Note
Operation under special ambient conditions
We highly recommend that you contact your Siemens representative or our application
department before you operate the device under special ambient conditions as can be
encountered in nuclear power plants or when the device is used for research and development
purposes.
18
WARNING
to observe this requirement cancels the manufacturer's warranty and the product
approvals.
Directive of the European Parliament and of the Council on the
approximation of the laws of the Member States relating to elec‐
tromagnetic compatibility and repealing Directive 89/336/EEC.
Directive of the European Parliament and the Council on the ap‐
proximation of the laws of the Member States concerning equip‐
ment and protective systems intended for use in potentially ex‐
plosive atmospheres.
Directive of the European Parliament and of the Council of the
harmonisation of the laws of Member States relating to electrical
equipment designed for use within certain voltage limits.
SIPART PS2 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00127926-AB