Change Log - Siemens SIPART PS2 Operating Instructions Manual

"Measuring range settings" tab
In this "Measuring range settings" tab you can find:
● Channel-specific Information (configurable: maximum 8 channels)
● Channel selection
● Configurable settings per channel:
"Appendices" tab
Configure files which are to be linked to the report.
In the "Appendices" tab you can find:
● Possible file types:
"Comments" tab
Additional comments for various types of comment
In the "Comments" tab you can find:
● Wiring errors
● Unsuitable measuring point
● Device error
● Error comment
10.2.2.7

Change log

The change log is used to record the actions carried out on system objects using SIMATIC
PDM.
SIPART PS2 with PROFIBUS PA
Operating Instructions, 02/2016, A5E00127926-AB
– Measuring circuit unit
– Measuring range
– Output unit
– Permissible deviation in output range (setpoint/actual value)
– Comment fields
– pdf
– doc; docx
– xls; xlsx
– txt
– jpg
Functions/operations using PROFIBUS PA
10.2 Acyclic data transfer
203