Calibration Menu - Rice Lake IQ plus 350 Installation Manual

3.2.3

Calibration Menu

See Section 4.0 on page 25 for calibration procedures.
CONFIG XXXXXXX FORMAT
WZERO WVAL
*CAL*
Display and edit
Display and edit test weight value
zero calibration
A/D count value
CALIBR Menu
Parameter Choices
Level 2 submenus
WZERO —
WVAL —
WSPAN —
REZERO —
CALIBR SERIAL PROGRM
WSPAN
*CAL*
Display and edit
span calibration
A/D count value
Figure 3-7. Calibration Menu
Display and edit the zero calibration A/D count value.
Display and edit the test weight value.
Display and edit the span calibration A/D count value.
Press Enter to remove an offset value from the zero and span calibrations.
Table 3-4. Calibration Menu Parameters
XXXXXXX PFORMT DIG IN XXXXXXX ALGOUT
REZERO
CAL*
*
Press Enter to
remove offset from
zero and span
calibrations
Description
XXXXXXX VERS
Configuration 19