Setup - Format Menu; Setup - Calibration Menu - Rice Lake Synergy 680HE Technical Manual

4.4.2 Setup – Format Menu
4.4.2.1 Primary and Secondary Menus
Parameter
Format – Sets the decimal point and the display divisions for the Primary (primar) and Secondary (secndr)
format
display weight format; For example, select 8888.885 if a count by of 0.005 is needed or select 888820 if a count by
of 20 is needed (the 8s serve as placeholders and show a breakdown of how digits will display);
Settings: 888881 (Primary default), 888882, 888885, 888810, 888820, 888850, 888100, 888200, 888500, 8.88881,
8.88882, 8.88885, 88.8881, 88.8882, 88.8885, 888.881, 888.882, 888.885, 8888.81, 8888.82, 8888.85, 88888.1,
88888.2, 88888.5 (Secondary default)
Units – Sets the units type; Settings: LB (Primary default), KG (Secondary default), OZ, TN, T, G, NONE
Units
Enable – Enables the front panel UNITS button to toggle between the primary and secondary formats (only displays
Enable
under Secondary); Settings: ON (default), OFF
4.4.3 Setup – Calibration Menu
Setup
Calibr
WZERO zrocnt
Parameter
Zero Calibration – Executes the zero calibration process; See
wzero
Zero Calibration Count – Displays the raw count value at the zero weight; A zero calibration (WZERO)
zrocnt
generates this raw count value; Manually changing this count value changes the zero weight and negates the
zero calibration
Test Weight Value – Sets the weight value for the span calibration; See
wval
Enter value: 0.00001–99999.99999, 10000.0 (default)
Span Calibration – Executes the span calibration process; See
wspan
Span Calibration Count – Displays the raw count value at the span weight; A span calibration (WSPAN)
spncnt
generates this raw count value; Manually changing this count value changes the span weight and negates the
span calibration
Setup
Format
PRIMAR
FORMAT UNITS
Figure 4-6. Format – Primary and Secondary Menus
Table 4-5. Format – Primary and Secondary Menu Parameters
WVAL WSPAN
Figure 4-7. Setup – Calibration Menu
Table 4-6. Setup – Calibration Menu Parameter
© Rice Lake Weighing Systems ● All Rights Reserved
SECNDR
FORMAT UNITS
Description
spncnt WLIN
Point1-4
Wlinv1-4 wlinc1-4
Description
Section 5.1 on page 40
Section 5.1 on page
Section 5.1.1 on page 40
Configuration
ENABLE
REZERO lstzro
wlinf1-4
40;
tmpzro
25