Rice Lake IQ plus 350 Installation Manual page 22

FORMAT Menu
Parameter Choices
Level 3 submenus
Primary Units (PRIMAR Parameter)
DECPNT 888888
888880
8.88888
88.8888
888.888
8888.88
88888.8
DSPDIV 1D
2D
5D
UNITS LB
KG
OZ
TN
T
G
NONE
Secondary Units (SECNDR Parameter)
DECPNT 88888.8
888888
888880
8.88888
88.8888
888.888
8888.88
DSPDIV 5D
1D
2D
UNITS KG
OZ
TN
T
G
LB
NONE
MULT 0.453592
Enter other
choices via
keyboard
MULEXP decimal
position
18 IQ plus 350 Installation Manual
Decimal point location. Specifies the location of the decimal point or dummy zeroes in the
primary unit display. Value should be consistent with local legal requirements.
Display divisions. Selects the minimum division size for the primary units displayed weight.
Specifies primary units for displayed and printed weight. Values are: LB=pound;
KG=kilogram; OZ=ounce; TN=short ton; T=metric ton; G=gram.
Units sold outside North America are configured with KG for both primary and
NOTE:
secondary units.
Decimal point location. Determines the location of the decimal point or dummy zeros in
the secondary unit display.
Display divisions. Selects the value of minimum division size of the displayed weight.
Specifies secondary units for displayed and printed weight. Values are: KG=kilogram;
OZ=ounce; TN=short ton; T=metric ton; G=gram; LB=pound.
Multiplier. Specifies the conversion factor by which the primary units are multiplied to
obtain the secondary units. The default is 0.453592, which is the conversion factor for
changing pounds to kilograms. For multiplier values of 10 or more, use the MULEXP
parameter to shift the decimal position of the multiplier. See Section 7.5 on page 38 for a
list of multipliers.
To toggle between primary and secondary units, press the UNITS key.
Multiplier exponent. Sets the decimal position for multiplier values of 10 or more.
Table 3-3. Format Menu Parameters (Continued)
Description