Through-Mount Version Water-Cooler Ip20, Ip54; Figure 8: Dimensions Push-Through Version Water-Cooler Ip20, Ip54 - KEB COMBIVERT F6 Instructions For Use Manual

DIMeNSIONS AND WeIGHTS

3.3.4 Through-mount version water-cooler IP20, IP54

252
373
74,5 72
200
356
(43,5)
187,5 125
41,5 125
202
132
262
Housing 4
Weight 12 kg
Dimensions All dimensions in mm
Figure 8: Dimensions push-through version water-cooler IP20, IP54
IP54 zone: heat sink underneath the mounting plate.
For proper installation, the enclosed seal (40F6T45-0002) must be installed
between heat sink and housing (e.g. cabinet wall). The tightness must be
checked after the installation. If properly installed, the separation to the housing
corresponds to degree of protection IP54.
IP20 zone: device above the mounting plate.
Power connections excluded => „Climatic environmental conditions". This part
is intended for the installation in a suitable housing for the required degree of
protection (e.g. control cabinet).
UL: Unit heat sink is classified as NEMA type 1.
43