Installation And Connection; Overview Of The Combivert F6; Figure 11: F6 Housing 4 Top View - KEB COMBIVERT F6 Instructions For Use Manual

OVerVIeW OF THe cOMbIVerT F6

4 Installation and connection

4.1 Overview of the cOMbIVerT F6
Housing 4
2
1 5 2
Figure 11: F6 housing 4 top view
3 2 4
5 2 6 5
No. Name
Shield clambs for shielded control
―
1
lines.
Attachment points for optional
shield plate. The shielding e.g.
from the motor cable is laid on
―
2 the mounting plate in the control
cabinet or on the shielding plate
00F6V80-4001
(optionally available).
LEDs (see the manual for control
unit chapter „Overview")
For control card COMPACT: FS
―
3 without function.
For control card APPLICATION:
Status display of the safety
module.
―
4 Interior fan
Protective earth;
at connection to protective earth
5 PE
each terminal may be assigned
only once.
Power circuit terminals for:
• Mains input
6 X1A • Braking resistor
• DC supply
• Motor connection
Description
45