Novalct; Smartlct - NovaStar MCTRL4K User Manual

Software Operations on PC

7.5.1 NovaLCT

Connect the MCTRL4K to the control computer installed with NovaLCT V5.2.0 or later via USB port to perform
screen configuration, brightness adjustment, calibration, display control, monitoring, etc. For details on their
operations, see NovaLCT LED Configuration Tool for Synchronous Control System User
Figure 7-7 NovaLCT

7.5.2 SmartLCT

Connect the MCTRL4K to the control computer installed with SmartLCT V3.4.0 or later via USB port to
perform building-block screen configuration, seam brightness adjustment, real-time monitoring, brightness
adjustment, hot backup, etc. For details on their operations, see the SmartLCT user manual.
Figure 7-8 SmartLCT
Firmware Update
7.6.1 NovaLCT
In NovaLCT, perform the following steps to update the firmware.
www.novastar.tech
MCTRL4K LED Display Controller User Manual
Manual.
33